Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer     

Jay?B.?ThomasEmail authorView author&#;s OrcID profile  Frank?S.?Spear 《Contributions to Mineralogy and Petrology》2018,173(5):42

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.  相似文献   

Correction to: Ferric/ferrous ratio in silicate melts: a new model for 1 atm data with special emphasis on the effects of melt composition     

Alexander?BorisovEmail authorView author&#;s OrcID profile  Harald?Behrens  Francois?Holtz 《Contributions to Mineralogy and Petrology》2018,173(12):107

  相似文献   

Composition of barian mica in multiphase solid inclusions from orogenic garnet peridotites as evidence of mantle metasomatism in a subduction zone setting     

Renata??opjakováEmail authorView author&#;s OrcID profile  Jana?Kotková 《Contributions to Mineralogy and Petrology》2018,173(12):106

Multiphase solid inclusions in minerals formed at ultra-high-pressure (UHP) provide evidence for the presence of fluids during deep subduction. This study focuses on barian mica, which is a common phase in multiphase solid inclusions enclosed in garnet from mantle-derived UHP garnet peridotites in the Saxothuringian basement of the northern Bohemian Massif. The documented compositional variability and substitution trends provide constraints on crystallization medium of the barian mica and allow making inferences on its source. Barian mica in the multiphase solid inclusions belongs to trioctahedral micas and represents a solid solution of phlogopite KMg₃(Si₃Al)O₁₀(OH)₂, kinoshitalite BaMg₃(Al₂Si₂)O₁₀(OH)₂ and ferrokinoshitalite BaFe₃(Al₂Si₂)O₁₀(OH)₂. In addition to Ba (0.24–0.67 apfu), mica is significantly enriched in Mg (X_Mg ~ 0.85 to 0.95), Cr (0.03–0.43 apfu) and Cl (0.04–0.34 apfu). The substitution vector involving Ba in the I-site which describes the observed chemical variability can be expressed as BaFe^IVAlClK_?1Mg_?1Si_?1(OH)_?1. A minor amount of Cr and ^VIAl enters octahedral sites following a substitution vector ^VI(Cr,Al)₂□^VI(Mg,Fe)_?3 towards chromphyllite and muscovite. As demonstrated by variable Ba and Cl contents positively correlating with Fe, barian mica composition is partly controlled by its crystal structure. Textural evidence shows that barian mica, together with other minerals in multiphase solid inclusions, crystallized from fluids trapped during garnet growth. The unusual chemical composition of mica reflects the mixing of two distinct sources: (1) an internal source, i.e. the host peridotite and its garnet, providing Mg, Fe, Al, Cr, and (2) an external source, represented by crustal-derived subduction-zone fluids supplying Ba, K and Cl. At UHP–UHT conditions recorded by the associated diamond-bearing metasediments (c. 1100 °C and 4.5 GPa) located above the second critical point in the pelitic system, the produced subduction-zone fluids transporting the elements into the overlying mantle wedge had a solute-rich composition with properties of a hydrous melt. The occurrence of barian mica with a specific chemistry in barium-poor mantle rocks demonstrates the importance of its thorough chemical characterization.  相似文献   

Metasomatism and the crystallization of zircon megacrysts in Archaean peridotites from the Lewisian complex,NW Scotland     

John?W.?Faithfull  Tim?J.?DempsterEmail author  John?M.?MacDonald  Monica?Reilly  EIMF 《Contributions to Mineralogy and Petrology》2018,173(12):99

Zircon megacrysts are locally abundant in 1–40 cm-thick orthopyroxenite veins within peridotite host rocks in the Archaean Lewisian gneiss complex from NW Scotland. The veins formed by metasomatic interaction between the ultramafic host and Si-rich melts are derived from partial melting of the adjacent granulite-facies orthogneisses. The interaction produced abundant orthopyroxene and, within the thicker veins, phlogopite, pargasite and feldspathic bearing assemblages. Two generations of zircon are present with up to 1 cm megacrystic zircon and a later smaller equant population located around the megacryst margins. Patterns of zoning, rare earth element abundance and oxygen isotopic compositions indicate that the megacrysts crystallized from crustal melts, whereas the equant zircon represents new neocryst growth and partial replacement of the megacryst zircon within the ultramafic host. Both zircon types have U–Pb ages of ca. 2464 Ma, broadly contemporaneous with granulite-facies events in the adjacent gneisses. Zircon megacrysts locally form?>?10% of the assemblage and may be associated to zones of localized nucleation or physically concentrated during movement of the siliceous melts. Their unusual size is linked to the suppression of zircon nucleation and increased Zr solubility in the Si-undersaturated melts. The metasomatism between crustal melts and peridotite may represent an analog for processes in the mantle wedge above subducting slabs. As such, the crystallization of abundant zircon in ultramafic host rocks has implications for geochemistry of melts generated in the mantle and the widely reported depletion of high field strength elements in arc magmas.  相似文献   

Origins and evolution of rhyolitic magmas in the central Snake River Plain: insights from coupled high-precision geochronology,oxygen isotope,and hafnium isotope analyses of zircon     

Dylan?P.?ColónEmail author  Ilya?N.?Bindeman  J?rn-Frederik?Wotzlaw  Eric?H.?Christiansen  Richard?A.?Stern 《Contributions to Mineralogy and Petrology》2018,173(2):11

We present new high-precision CA-ID-TIMS and in situ U–Pb ages together with Hf and O isotopic analyses (analyses performed all on the same grains) from four tuffs from the 15?10 Ma Bruneau–Jarbidge center of the Snake River Plain and from three rhyolitic units from the Kimberly borehole in the neighboring 10?6 Ma Twin Falls volcanic center. We find significant intrasample diversity in zircon ages (ranges of up to 3 Myr) and in δ¹⁸O (ranges of up to 6‰) and ε_Hf (ranges of up to 24 ε units) values. Zircon rims are also more homogeneous than the associated cores, and we show that zircon rim growth occurs faster than the resolution of in situ dating techniques. CA-ID-TIMS dating of a subset of zircon grains from the Twin Falls samples reveals complex crystallization histories spanning 10⁴–10⁶ years prior to some eruptions, suggesting that magma genesis was characterized by the cyclic remelting of buried volcanic rocks and intrusions associated with previous magmatic episodes. Age-dependent trends in zircon isotopic compositions show that rhyolite production in the Yellowstone hotspot track is driven by the mixing of mantle-derived melts (normal δ¹⁸O and ε_Hf) and a combination of Precambrian basement rock (normal δ¹⁸O and ε_Hf down to ??60) and shallow Mesozoic and Cenozoic age rocks, some of which are hydrothermally altered (to low δ¹⁸O values) by earlier stages of Snake River Plain magmatism. These crustal melts hybridize with juvenile basalts and rhyolites to produce the erupted rhyolites. We also observe that the Precambrian basement rock is only an important component in the erupted magmas in the first eruption at each caldera center, suggesting that the accumulation of new intrusions quickly builds an upper crustal intrusive body which is isolated from the Precambrian basement and evolves towards more isotopically juvenile and lower-δ¹⁸O compositions over time.  相似文献   

Electrical conductivity of the plagioclase–NaCl–water system and its implication for the high conductivity anomalies in the mid-lower crust of Tibet Plateau     

Ping?Li  Xinzhuan?GuoEmail author  Sibo?Chen  Chao?Wang  Junlong?Yang  Xingfan?Zhou 《Contributions to Mineralogy and Petrology》2018,173(2):16

In order to investigate the origin of the high conductivity anomalies geophysically observed in the mid-lower crust of Tibet Plateau, the electrical conductivity of plagioclase–NaCl–water system was measured at 1.2 GPa and 400–900 K. The relationship between electrical conductivity and temperature follows the Arrhenius law. The bulk conductivity increases with the fluid fraction and salinity, but is almost independent of temperature (activation enthalpy less than 0.1 eV). The conductivity of plagioclase–NaCl–water system is much lower than that of albite–NaCl–water system with similar fluid fraction and salinity, indicating a strong effect of the major mineral phase on the bulk conductivity of the brine-bearing system. The high conductivity anomalies of 10^?1 and 10⁰ S/m observed in the mid-lower crust of Tibet Plateau can be explained by the aqueous fluid with a volume fraction of 1 and 9%, respectively, if the fluid salinity is 25%. The anomaly value of 10^?1 S/m can be explained by the aqueous fluid with a volume fraction of 6% if the salinity is 10%. In case of Southern Tibet where the heat flow is high, the model of a thin layer of brine-bearing aqueous fluid with a high salinity overlying a thick layer of partial melt is most likely to prevail.  相似文献   

Assessing the performance of WRF model in predicting high-impact weather conditions over Central and Western Africa: an ensemble-based approach     

Igri  P. Moudi  Tanessong  Roméo S.  Vondou  D. A.  Panda  Jagabandhu  Garba  Adamou  Mkankam  F. Kamga  Kamga  A. 《Natural Hazards》2018,93(3):1565-1587

Natural Hazards - For numerical weather prediction over a particular region, it is important to know the best combination of physical parameterizations available in the considered modelling frame...  相似文献   

High-dimensional geostatistical history matching     

João Carneiro  Leonardo Azevedo  Maria Pereira 《Computational Geosciences》2018,22(2):607-622

Hydrocarbon reservoir modelling and characterisation is a challenging subject within the oil and gas industry due to the lack of well data and the natural heterogeneities of the Earth’s subsurface. Integrating historical production data into the geo-modelling workflow, commonly designated by history matching, allows better reservoir characterisation and the possibility of predicting the reservoir behaviour. We present herein a geostatistical-based multi-objective history matching methodology. It starts with the generation of an initial ensemble of the subsurface petrophysical property of interest through stochastic sequential simulation. Each model is then ranked according the match between its dynamic response, after fluid flow simulation, and the observed available historical production data. This enables building regionalised Pareto fronts and the definition of a large ensemble of optimal subsurface Earth models that fit all the observed production data without compromising the exploration of the uncertainty space. The proposed geostatistical multi-objective history matching technique is successfully implemented in a benchmark synthetic reservoir dataset, the PUNQ-S3, where 12 objectives are targeted.  相似文献   

Source constraints for the young basaltic rocks from the northernmost end of Cappadocian region,Turkey: Melting evidence from peridotite and pyroxenite source domains     

Biltan Kürkcüoğlu  M. Tekin Yürür 《Chemie der Erde / Geochemistry》2022,82(1):125838

Widespread magmatic activity developed in the Middle Miocene in the Cappadocian Region of Central Anatolia in Turkey. Despite several previous studies that focus on the geochemical features of the magmatic rocks, the source components and development of melting conditions are still a matter of debate.Recent basaltic rocks from Karaburna and Gül?ehir (1228 and 96 Ka, respectively, Dogan, 2011) are considered as a part of the Central Anatolian Volcanic Province, situated at the northernmost end of the Cappadocian Region. These lavas have similar large ion lithophile (LIL) (except Rb) and high field strength (HFS) element abundances, however, Karaburna samples are more enriched in HFS elements, and both of the rocks suites reflect HFS depletions relative to the OIB signature.Karaburna and Gül?ehir basalts have low Nb/La (0.45–0.5; 0.35–0.5), Nb/Th (2.75–4.61; 1.26–2.85) values, respectively, suggesting contributions from crustal sources, whereas Zr/Ba ratios of these samples range between 0.32–0.93 and 0.4–0.88 and imply that these rocks appear to be derived from asthenospheric sources. These incompatible element ratios can be attributed to either different geochemical processes, or are related to melting from different source component(s).The ambient mantle source of the Cappadocian region appears to be consistent with spinel peridotite, but this domain is not solely satisfactory to represent the melting conditions in the light of new elemental data. Values of Tb/Yb(N) and Zn/Fe provide new constraints suggesting the magmas were generated from the asthenosphere. Tb/Yb(N) ratio separates garnet – spinel transition Tb/Yb_(N) (>1.8) and Zn/Fe ratio displays separation between the peridotite-derived (Zn/Fe <12) and pyroxenite-derived (13?20) melts.A melting model based on REE ratios and Zn/Fe, Co/Fe, Tb/Yb(N) values indicates that basaltic rocks were not derived from a single source component (peridotite). Instead, those values suggest substantial melting contributions from a pyroxenite source domain, which has not been discussed as a source component in previous studies. Melts, from both of the source domains, with the result of asthenospheric upwelling linked to the downgoing Aegean and Cyprean slabs, are distinct from the alkaline character frequently observed as the final products of recent volcanic activity in the Cappadocian region and also explains the different trace element variations observed in such a small scale.  相似文献   

银额盆地哈日凹陷油气成藏条件及成藏模式     

常甜甜 《地质与勘探》2022,58(4):905-916

近年来,银额盆地哈日凹陷的油气勘探呈现出良好的态势,但对于哈日凹陷油气成藏条件相关研究甚少,已不能满足目前油气勘探开发的需求。本研究基于钻录井、地球物理、分析化验等资料,系统分析哈日凹陷油气成藏的烃源岩、储层、圈闭等条件,总结油气成藏条件配置关系,以期为哈日凹陷的后续油气勘探及地质研究提供依据。哈日凹陷主要发育三套烃源岩,其中银根组烃源岩有机质丰度极高,成熟度较低,有机质类型为Ⅰ-Ⅱ1型;巴二段烃源岩有机质丰度较高,成熟-高成熟,有机质类型为Ⅱ1-Ⅱ2型;巴一段烃源岩有机质丰度中等,成熟-高成熟,有机质类型为Ⅱ1-Ⅱ2型。储层类型为砂（砾）岩常规储层、碳酸质泥岩非常规储层和火山岩储层,且均属于特低孔超低渗储层,其中砂、砾岩储层和灰质泥岩储层物性最好,白云岩储层和火成岩储层次之,目前主力油藏主要集中在砂、砾岩储层和灰质泥岩储层这两种类型中。哈日凹陷主要发育两套岩性圈闭,即巴一段砂岩岩性圈闭和巴二段泥岩岩性圈闭,形成了源内（准）连续成藏模式和近源不连续成藏模式。  相似文献